DJI Matrice 4TD Pet SAR Build-Your-Bundle

DJI Matrice 4TD Pet SAR Build-Your-Bundle from Drone-Works | Configure Your Own Drone Combo
Drone-Works has been a leading drone retailer since 2014. Unlike other drone dealers, we don’t include items in our bundles you’ll never use and we don’t inflate the price while saying it is a “bundle special.” We educate you on the available options/accessories, what you may or may not need, and then let you user-configure the bundle to exactly how you want from a list of available options you can trust because we’ve hand selected them based on our experience in the industry. 
The Matrice 4TD bundle starts with the OEM DJI combo:
DJI Matrice 4TD Aircraft
DJI RC Plus 2 Enterprise Controller
1x intelligent flight battery
DJI Matrice 4 Series 240W Charging Hub
DJI 240W USB-C Power Adapter
DJI Matrice 4TD Propellers (Pair) x3
USB-C to USB-C Cable
USB-A to USB-C Cable
Gimbal Cover
Screwdriver & Screws
microSD Card 64GB
DJI Matrice 4TD Hard Case
You then have the option of selecting extras accessories from the options above!
For a complete Matrice 4TD Pet SAR setup, we recommend at least 4 total flight batteries to keep you in the air continuously and a spotlight as a minimum requirement.
Let’s talk about spotlight options!
Spotlights:
DJI AL1 (most popular): this is DJI’s flagship spotlight designed for the drone. It can be combined with the AS1 speaker for use in unison. You don’t have to land to swap out accessories. The AL1 is a visible-light spotlight only with no NIR (near-infrared) or laser pointer capabilities.
JZ T40(P) spotlight: this is an aftermarket spotlight which has been reported to be brighter than the AL1 and it comes with an integrated visible laser pointer which can be used to pinpoint targets to searchers on the ground. JZ is a highly trusted name in the drone industry and makes fantastic products. However, this spotlight cannot be used in conjunction with the AS1 speaker. Therefore, the drone would have to be landed to swap out payloads.
Speaker: the AS1 speaker, as mentioned above, can be used in conjunction with the AL1 spotlight. It is useful for broadcast calls over a large area.
Optional fast chargers:
The included OEM charging hub from DJI charges just one battery at a time. We offer several options for optional fast chargers to keep you in the air longer.
LKTOP 300W fast charger: this 300W charger can charge 3 batteries simultaneously in approximately 90 minutes.
AK M4TD3 charging hub (most popular): this aftermarket 600W charging hub can accept 3 batteries at once and can charge all in approximately 50 minutes.
Additional DJI OEM charging hub: the stock DJI 240W charging hub can charge one battery to 100% in 55 minutes or to 90% (ready-to-fly mode) in 40 minutes. Having an additional charging hub means you can charge 2 batteries in this time. If selecting an additional 240W DJI hub, you will also want to select an additional 240W power adapter. The power adapter is the “brick” that connects to the wall that the hub connects to.
Optional WB37 controller battery: the controller for the Matrice 4TD features a built-in battery with up to 7 hours of run time. You have the option of using an external DJI WB37 controller battery which fits in the back of the controller for an additional 4-6 hours of run time on extended operations. The battery is hot swappable and helps ensure you don’t get grounded due to a dead controller. Optionally, you can also add the LKTOP charging hub to charge the WB37 battery independently of the controller. Alternatively, the WB37 can be charged while installed in the controller using the included OEM charger. Therefore, the charging hub for the WB37 is also an optional accessory but handy in situations where you are flying for hours at a time and need to ensure continued operations without interruption.
LKTOP WB37 charging hub: The optional WB37 remote battery can be charged while installed in the remote using the OEM charger, or this optional LKTOP charging hub allows for separate, faster charging of up to 2x batteries.
Mobile ops monitor case: Lastly, you can choose to add on a Seetec 21.5″ rugged monitor case for enhanced mobile field ops. The Seetec case features a 1000nit daylight-bright monitor enclosed in a ruggedized case. This allows you to output the controller screen onto a larger viewing surface for better viewing of small details on the go. We recommended powering it with a vehicle power inverter or mobile power source such as a Jackery or EcoFlow lithium generator. This can also be used for mobile charging of drone batteries in the field.